Capture Cutting Edge Video
Posts tagged 6v
6V Camcorder Battery
Mar 17th
6V Camcorder Battery
JVC BN-V12U Digital Camcorder Replacement Battery 6V 2100mah
Camcorder Battery replacement?
Where can I find or request a replacement battery pack for a camera of Sharp? The model no. is VL-MX7H-GY. It is a 6V. I live in PA and I have to before Saturday! Any ideas?
check your local electronics shop ... call. You can find a generic one at Wal-Mart or Best Buy if you have one nearby.
Battery Christmas Lights
Battery Lights Christmas
Most of the Christmas lights have to be plugged into the wall to get power. But if you could run on batteries that can be placed anywhere an outlet is not available - as in a bicycle.
The type of electricity it gets from the wall is called AC, and the kind you get from batteries called DC. You have three options for the operation of the Christmas lights outside DC (battery):
* Buy an already wired for DC.
* Use a device called an inverter that converts DC to AC.
* Reconfigure Christmas lights to run DC.
Whatever option you choose, it is important that you use LED Christmas lights because they use 90-98% less electricity than the standard lights, so the batteries last longer. Much longer, like 16 more times. Instead of 15 minutes with incandescent bulbs, you can get four hours with LED's. I ran a test with a large battery and has only two hours on a bulb of 20-chapter of the old school of lights, and a whopping 31 hours with a 20-bulb LED chapter. Dude / Dudette, the use of LED's.
When I first wrote this page Some years ago, LED lights of Christmas are limited, and certainly there was no cable to run on batteries, so I was sharing two big secrets: one, you want LED's for long battery life, and two, how to ReWire batteries. But now you can buy off the shelf solution without having to rewire anything, as shown in the yellow box on the left hand lights, battery and charger. The only extra is added some connectors on the ends of cables to allow me to easily "plug" battery for the lights or the shipper. This is a 2200mAh battery and gives me 31 hours of runtime (!) With this combination.
So three out of the products available are the easiest solution. There are others, however. Here are all options:
- Buy an already wired for DC. This is by far the easiest option. You can get from Inirgee (which will give Lifetime guarantee) or Backwoods Solar, which has a bulb that uses 18-chapter 1 / 2 watt, and a chapter of 36-watt bulb that uses a. If you know of another online source for DC LED Christmas lights I will be happy to include it here as well. I did once see a small incandescent (NON-LED), set in an improvement store Lowe's home for $ 1.97, but I estimate two C batteries needed only last about 75 minutes because the lights are standard (incandescent). You really have to go with LED's if you want a significant amount of battery life.
- Buy a cable connection for AC and the use of an inverter to power batteries. An inverter changes DC current into AC. Connect a 12V battery to the inverter, and then just plug Christmas lights into standard power outlet on the inverter. It's like a mini power plant.
When I started writing this page and off-the-shelf, pre-12V LED lights Wired Christmas does not exist. Now that no longer exist, there is little reason to go with an inverter. The main reason is if you already have an inverter or AC LED Christmas lights, so that only need the other piece to get up and running. - ReWire provides an AC battery. It is very easy to take a cable series for AC and battery-operated ReWire. I'll show you how to do that further down the page, with nice pretty pictures.
No matter what method you use, you'll want know what kind of batteries to use and how long they will last. So we cover now.
How long run you will get from batteries
Calculating electricity usage is easy. The formula is simple:
Volts x Amps = Watts
We usually go to short. (eg 2.5 V = 2.5 V, 25 W = 25 watts).
They have not even know what volts, amps and watts are, as long as you know the formula.
When used one watt of electricity for an hour, which is a watt-hour, or Wh. A power amplifier for an hour is an amp-hour, or Ah. Store batteries as a small amount of electricity that are generally classified in milliamp-hour instead of ampere-hour (mAh). 1800mAh is the same as 1.8Ah.
A typical 50-bulb filament (NON-LED) Christmas lights uses 25 watts. So each bulb uses about half a watt. (Remember, we will use later.) Now we must see how much electricity is stored in a battery.
A typical rechargeable AA battery (NiMH) places at 1.2V and is rated at 2200mAh. Remember that V x A = W, we see that a single battery has a capacity of 1.2V x 2.2Ah = 2.64Wh. However, the use of lights of 25 watts. So you require ten batteries to power the lights for just one hour. Ouch.
You have four options for more run time of batteries:
- Use LED Christmas lights in place, such as Inirgee. LEDs use electricity 80-90% less than regular lights. So the batteries will last about 16 times more.
- Use fewer bulbs. Who says you have to use 50 lights? Use only the 25 and then the batteries last twice as long. Use the lights still less and get more battery time.
- Using more batteries. The more batteries you use, you will have more total power.
- Use higher-capacity batteries. NiMH D-cells store up 11,000 mAh. You can also use a small lead acid battery or a rechargeable pack toy cars used for camcorders and remote control.
My solution is to use LED lights. Thus not have to limit the number of lights, use or deal with the buying and recharging of batteries gazillion. I have 31 hours of runtime with the installation program listed in the yellow box at the top of this page. LED's offer other advantages: it burn (not by a ten years, anyway), and are injured - that do not break easily, as weak regular Christmas lights. Most lights have been sold by Inirgee permanently mounted bulbs can not fall out of their sockets, and have a lifetime warranty.
Now that we know we must use, LED-witted, or a lot battery power, we will choose a power source for lights.
Selection of batteries
You can use standard household batteries (title = "AA / AAA BATTERIES"> AA / AAA, etc), or you can buy a battery pack as which appears at the top of this page. The advantage of a larger battery is that there is only one thing is free. A single 12V pack takes the place of the ten cells individual household. It is much easier to load the package of ten separate batteries.
On the other hand, if your lightset requires only 2 or 4 batteries, then it is more cheaper to use only batteries to buy a large package. Each rechargeable battery (AA, AAA, etc.) puts out 1.2V. If you need 6.0V, then is, five batteries (5 x 1.2 V = 6.0V). Non-rechargeable batteries put more voltage (1.5V), but do not recommend it because it is a waste of using disposable batteries. It is certainly possible to do so, but if you choose to then you're on your own. The numbers that follow assume that you are using rechargeable batteries. To wire up the batteries for lightset, only needs a battery holder from Radio Shack, which costs about $ 1 or something. If you need an odd number of batteries, such as 5, then obtain a 4-battery holder and a 1-battery holder and attach the wires together. Connect opposite colors together (red + black).
Rewiring Christmas lights with batteries
This is where you can play mad scientist. Many devices running only AC or DC, but the lights are not very demanding and drain well. The trick is just to rewire the chapter to get the correct wattage bulbs. Remember, you really, really should use lights LED or the batteries just will not last long. Even so, we will use standard (non-LED) bulbs in our example below, because they are the most common.
A providing an outlet About 120V, so if there are 50 lights on the beach, each bulb is 2.4V. The bulbs actually want to 2.5V, thus providing them only 2.4V makes only a little dimmer, but not much, reduce stress and make them last longer anyway. In our example below, we offer our chapter 9.6V battery, which powers four lamps (4 x 2.5V = 10V). Before you start screaming that four of bulbs is not enough, do not worry, in a minute I'll show you how to connect multiple sets of four together.
Most Christmas lights are 2.5V, but some are different and that could be more or less. Normally, voltage is printed on the box the lights or on a label on the beach. If they are LED lights, then every color has a different voltage, LED Whites are generally ~ 3.5V. If you can not find the voltage, check with the manufacturer. Also, do not assume that if a 50-chapter bulb is 2.5V bulb bulbs 100-chapter should be 1.25V bulbs, is more likely that the bulb of 100 Strand is only two 50-bulb filaments interconnected.
Of all Anyway, here is how to connect four 2.5V lights together:
But what if you want power more than four measley lights? Easy, just to create multiple sets of four lights and hook them all. You can have as many sets of four as you like, though the more lights you have the battery faster be exhausted. Here's how to connect three groups of four bulbs together.
This is what seems real lights:
STEP 1: Do three sets of four bulbs each
I tied up the slack so the light would be more compact.
There is nothing special between each bulb, only a continuous thread.
STEP 2: Connect all the "heads" together.
That is, make sure the beginning of each set is connected by a cable. There was usually able to wrap the wire around the other cables, but I made the cable separately here so it is easier to see how the wiring works.
STEP 3: Connect all the "tails" together.
That is, make sure the end of each set is connected by a cable. Normally, the return wire is also wrapped around the other wires. I did it separately so it is easy to see how it's wired. Note the battery is actually eight batteries, although only four are visible (the other four are at the bottom, two batteries is deep).
This set was to last nearly two hours on a set of eight 1.2V AA NiMH batteries with 1800mAh capacity each (like the kind of Radio Shack sells). Remember that each bulb use means of watt-hours per hour. So use that 12 bulbs 6wH per hour. Our Store batteries (8 batteries 1.2V x = x 1800mAh) 17,280 MWh, 17 Wh. Therefore, our 17 Wh battery pack will power 6-watt chapter for nearly three hours.
So there you have three ways to reach to the Christmas lights with batteries!
http://www.ebattery.com.au
 BN-V11U BN-V12U BN-V25U Battery PACK FOR JVC Camcorder Sale Price: $6.34 DescriptionNever run out of battery power when you're just about to capture the perfect moment! Time to get extra power for your digital video camera/camcorder. High capacity, rechargeable 6V Ni-Mh battery with premium cell. Best replacement for these original battery packs: JVC: BN-V11U / BN-V12U / BN-V14U / BN-V18U / BN-V20U / BN-V22U / BN-V24U / BN-V25U / PANASONIC: AKKUVZ8240 / HHR-V20A/1B / PV-BP15 / PV-BP17 / VW-VBS1 / VW-VBS2. Compatible with: JVC. GR-AS-X760U / GR-AW1 / GR-AX10 / GR-AX1010U / GR-AX10U / GR-AX17 / GR-AX17U / GR-AX200 / GR-AX200U / GR-AX210 / GR-AX210U / GR-AX25 / GR-AX250 / GR-AX2U / GR-AX30 / GR-AX310 / GR-AX33 / GR-AX33U / GR-AX35 / GR-AX350U / GR-AX37 / GR-AX37U / GR-AX400 / GR-AX410 / GR-AX420U / GR-AX5 / GR-AX500 / GR-AX50U / GR-AX510U / GR-AX55 / GR-AX55U / GR-AX5EG / GR-AX5U / GR-AX70 / GR-AX700U / GR-AX70U / GR-AX710U / GR-AX720 / GR-AX74U / GR-AX7EG / GR-AX7U / GR-AX800 / GR-AX808U / GR-AX820US / GR-AX890US / GR-AX900U / GR-AX90U / GR-AX910 / GR-AX910U / GR-AX920 / GR-AX94 / GR-AX9U / GR-AXM230U / GR-DVA1U / GR-DVF10U / GR-FX17 / GR-FXM41 / GR-SV3GR-S27 / GR-SXM250US / GR-SXM260US / GR-SXM330U / GR-SXM730U / GR-SXM750US / GR-SXM930U. Compatible with: Panasonic. NV-G2 / NV-S1 / NV-S2 / NV-S6 / NV-S7 / NV-S8 / NV-S100 / PV-20 / PV-10B / PV-10 / PV-10PX / PV-14 / PV-17 / PV-18 / PV-19 / PV-21 / PV-22 / PV-31 / PV-32 / PV-40 / PV-41 / PV-42 / PV-43 / PV-50 / PV-53 / PV-332 / PV-333 / PV-362 / PV-5630 / PV-A206 / PV-5372 / PV-A207 / PV-A286 / PV-A306 / PV-A307 / PV-D326 / PV-D406 / PV-D407 / PV-D506 / PV-D507 / PV-D607 / PV-D705 / PV-D1000 / PV-IQ203 / PV-IQ205 / PV-IQ244D / PV-IQ303 / PV-IQ305 / PV-IQ306 / PV-IQ325 / PV-IQ403 / PV-IQ404 / PV-IQ404A / PV-IQ405 / PV-IQ503 / PV-IQ504 / PV-IQ505 / PV-IQ525 / PV-L557 / PV-559 / PV-L606 / PV-L657 / PV-L757 / PV-L857 / PV-S43 / PV-S53 / PV-S62 / PV-S63 / PV-S64 / PV-S72 / PV-S332 / PV-S372 / PV-S630 / PV-S770A Features
 |
Eligible for free shipping!  Canon VIXIA HF R300 Camcorder Battery Lithium Ion (2800 mAh 3.6v) With Charger - Replacement For Canon BP-727 Battery & Charger Sale Price: $34.95 DescriptionBP-727 Rechargeable Lithium-Ion Replacement Battery Pack With Charger - (2800 mAh 3.6V) - Replacement For Canon BP-727 Rechargeable Battery Features
|
 High Capacity JVC BN-V10U,BN-V11U, BN-V12U,BN-V14U,BN-V15,BN-V18U Premium Quality Camcorder Battery Sale Price: $6.34 DescriptionJVC BN-V10U,BN-V11U, BN-V12U,BN-V14U,BN-V15,BN-V18U Camcorder Battery - Compatible with JVC GR-1U, GR-323U, GR-AS-X760U, GR-AW1, GR-AW1U, GR-EX1, GR-EX7, GR-EZ1U, GR-S27, XM-D1BK, JVC GR-AX, GR-AXM, GR-DV, GR-FX, GR-FXM, GR-LT, GR-M, GR-SV Features
|
 Duracell DR-10 Universal 8mm / VHS-C Camcorder Battery List Price: DescriptionNiMH Multi-Format Camcorder Battery. Why is that camcorder batteries always seem to run out of power when you need them the most? Don't get caught unprepared! Get a backup battery and preserve those memories. Fits many JVC, Sony, and Panasonic Camcorders. Features
|
 Sakar Digital Concepts CB-10 Replacement Battery for use with Panasonic, JVC, and RCA Camcorders List Price: Description2000 MAH 6V NICAD 100% MEMORY-FREE 5-YEAR WARRANTY The Sakar Digital Concepts CB-10 replacement battery for use with Panasonic, JVC, and RCA camcorders replaces the original battery for your compatible Panasonic, JVC, and RCA camcorders. The CB-10 is a memory-free, Nickel-cadmium rechargeable battery that holds a charge up to 2000 mAh. This replacement battery is compatible with most of Panasonic's PV-BP series, JVC BN-V series, and some RCA series camcorders. Features
|
 VHS-C / 8mm Ni-MH 6V 2700mAh Rechargeable Camcorder Battery - Fits many VHS-C and 8mm Camcorders - Again & Again RC6032 Arkor NP55 NP77 Batteries R Us C111188 C115188H C122188HH Batteries R Us C118789 C123690 C124690H Bell & Howell C124690H Bescor BP17H BP17NMH BP955 BP975 BP975XT Britek NP55 NP55G NP77 NP77G PTV877 Coast NP77H Dantona CAM10NMH CAM577H CAM694NMH DaDirect Power Plus DV8044 List Price: DescriptionVHS-C / 8mm Ni-MH 6V 2700mAh Rechargeable Camcorder Battery - Fits many VHS-C and 8mm Camcorders - Again & Again RC6032 Arkor NP55 NP77 Batteries R Us C111188 C115188H C122188HH Batteries R Us C118789 C123690 C124690H Bell & Howell C124690H Bescor BP17H BP17NMH BP955 BP975 BP975XT Britek NP55 NP55G NP77 NP77G PTV877 Coast NP77H Dantona CAM10NMH CAM577H CAM694NMH DaDirect Power Plus DV8044 DV8066 DPV8066T DPV8077 DPV8088 Dual Voltage DV8044 DV8066 DV8066P DV8077 DVL5 Panasonic BP-508 HHR-V20A HHR-V214 HHR-V40A HHR-V60A PVBP12 PVBP15 PVBP17 PVBP18 VWVBS1E VW-VBS2E Sony NP90, NP98, NP99, NPF730 NP55, NP60, NP65, NP66, NP66H, NP68, NP77, NP77H, NP78, NP80, NP88 Features
|
 2-Port USB Car Charger Adapter List Price: DescriptionTechnical Specification: Input Voltage (DC): From 12 Vdc Nominal / From 10-24Vdc Maximum ; Input Current: 1.0A max at 12Vdc ; 75% minimum at dc output full loading and nominal DC input voltage range. Output Voltage: Vout: 5.0V, Range: 5.0 - 5.6V, Vpp: 200mA max ; Output Current (DC): 0 - 1.5A ; Protection: SCP : For short circuited protection and with auto-recovery function. Operation Temperature: 5 to 40 Degree Celsius ; Storage Temperature: -40 to 70 Degree Celsius Features
|
 Replacement Sony NP-BG1 Equivalent LithiumIon Camera Battery For SONY DSC-H9/DSC-H7/DSC-H3 /DSC-H50/DSC-W30/DSC-W35/DSC-W50/DSC-W55/DSC-W70 List Price: DescriptionSony NP-BG1 Camera Battery and Charger Features
|
 Dekcell Replacement for JVC BN-V11U Compatible Ni-mh Battery Sale Price: $6.34 DescriptionNever run out of battery power when you're just about to capture the perfect moment! Time to get extra power for your digital video camera/camcorder. High capacity, rechargeable 6V Ni-Mh battery with premium cell. Best replacement for these original battery packs: JVC: BN-V11U / BN-V12U / BN-V14U / BN-V18U / BN-V20U / BN-V22U / BN-V24U / BN-V25U / PANASONIC: AKKUVZ8240 / HHR-V20A/1B / PV-BP15 / PV-BP17 / VW-VBS1 / VW-VBS2. Compatible with: JVC. GR-AS-X760U / GR-AW1 / GR-AX10 / GR-AX1010U / GR-AX10U / GR-AX17 / GR-AX17U / GR-AX200 / GR-AX200U / GR-AX210 / GR-AX210U / GR-AX25 / GR-AX250 / GR-AX2U / GR-AX30 / GR-AX310 / GR-AX33 / GR-AX33U / GR-AX35 / GR-AX350U / GR-AX37 / GR-AX37U / GR-AX400 / GR-AX410 / GR-AX420U / GR-AX5 / GR-AX500 / GR-AX50U / GR-AX510U / GR-AX55 / GR-AX55U / GR-AX5EG / GR-AX5U / GR-AX70 / GR-AX700U / GR-AX70U / GR-AX710U / GR-AX720 / GR-AX74U / GR-AX7EG / GR-AX7U / GR-AX800 / GR-AX808U / GR-AX820US / GR-AX890US / GR-AX900U / GR-AX90U / GR-AX910 / GR-AX910U / GR-AX920 / GR-AX94 / GR-AX9U / GR-AXM230U / GR-DVA1U / GR-DVF10U / GR-FX17 / GR-FXM41 / GR-SV3GR-S27 / GR-SXM250US / GR-SXM260US / GR-SXM330U / GR-SXM730U / GR-SXM750US / GR-SXM930U. Compatible with: Panasonic. NV-G2 / NV-S1 / NV-S2 / NV-S6 / NV-S7 / NV-S8 / NV-S100 / PV-20 / PV-10B / PV-10 / PV-10PX / PV-14 / PV-17 / PV-18 / PV-19 / PV-21 / PV-22 / PV-31 / PV-32 / PV-40 / PV-41 / PV-42 / PV-43 / PV-50 / PV-53 / PV-332 / PV-333 / PV-362 / PV-5630 / PV-A206 / PV-5372 / PV-A207 / PV-A286 / PV-A306 / PV-A307 / PV-D326 / PV-D406 / PV-D407 / PV-D506 / PV-D507 / PV-D607 / PV-D705 / PV-D1000 / PV-IQ203 / PV-IQ205 / PV-IQ244D / PV-IQ303 / PV-IQ305 / PV-IQ306 / PV-IQ325 / PV-IQ403 / PV-IQ404 / PV-IQ404A / PV-IQ405 / PV-IQ503 / PV-IQ504 / PV-IQ505 / PV-IQ525 / PV-L557 / PV-559 / PV-L606 / PV-L657 / PV-L757 / PV-L857 / PV-S43 / PV-S53 / PV-S62 / PV-S63 / PV-S64 / PV-S72 / PV-S332 / PV-S372 / PV-S630 / PV-S770A Features
|
 Lenmar NMH22 Nickel Metal-Hydride Camcorder Battery Equivelent to the Sharp BT-H21U and BT-H22U Batteries List Price: DescriptionWhatever your camcorder brand or application, you can count on Lenmar to bring you the latest technology. Our engineers are constantly developing new products to compliment your camcorder, whether it is a battery, Lenmar is always ''ahead-of-the-curve'' in today''s battery. Features
|